diff --git a/config/src/main/resources/org/springframework/security/config/spring-security-3.1.rnc b/config/src/main/resources/org/springframework/security/config/spring-security-3.1.rnc index e788112273..564d0e6af8 100644 --- a/config/src/main/resources/org/springframework/security/config/spring-security-3.1.rnc +++ b/config/src/main/resources/org/springframework/security/config/spring-security-3.1.rnc @@ -524,7 +524,7 @@ session-management.attlist &= ## Allows injection of the SessionAuthenticationStrategy instance used by the SessionManagementFilter attribute session-authentication-strategy-ref {xsd:token}? session-management.attlist &= - ## Defines the URL of the error page which should be shown when the SessionAuthenticationStrategy raises an exception. If not set, an unauthorized (402) error code will be returned to the client. Note that this attribute doesn't apply if the error occurs during a form-based login, where the URL for authentication failure will take precedence. + ## Defines the URL of the error page which should be shown when the SessionAuthenticationStrategy raises an exception. If not set, an unauthorized (401) error code will be returned to the client. Note that this attribute doesn't apply if the error occurs during a form-based login, where the URL for authentication failure will take precedence. attribute session-authentication-error-url {xsd:token}? diff --git a/config/src/main/resources/org/springframework/security/config/spring-security-3.1.xsd b/config/src/main/resources/org/springframework/security/config/spring-security-3.1.xsd index 7c45e2e894..f061bc2943 100644 --- a/config/src/main/resources/org/springframework/security/config/spring-security-3.1.xsd +++ b/config/src/main/resources/org/springframework/security/config/spring-security-3.1.xsd @@ -1,611 +1,834 @@ - - + + - - - Defines the hashing algorithm used on user passwords. We recommend strongly against using MD4, as it is a very weak hashing algorithm. - - - - - - - - - - - - - + + + Defines the hashing algorithm used on user passwords. We recommend strongly against using + MD4, as it is a very weak hashing algorithm. + + + + + + + + + + + + + + - - - Whether a string should be base64 encoded - - + + + Whether a string should be base64 encoded + + + - - - Supersedes the 'path-type' attribute. Defines the strategy use for matching incoming requests. Currently the options are 'ant' (for ant path patterns), 'regex' for regular expressions and 'ciRegex' for case-insensitive regular expressions. - - - - - - - - - + + + Supersedes the 'path-type' attribute. Defines the strategy use for matching incoming + requests. Currently the options are 'ant' (for ant path patterns), 'regex' for regular + expressions and 'ciRegex' for case-insensitive regular expressions. + + + + + + + + + + - - - Deprecated. Use request-matcher instead. - - - - - - - - + + + Deprecated. Use request-matcher instead. + + + + + + + + + - - - Specifies an IP port number. Used to configure an embedded LDAP server, for example. - - + + + Specifies an IP port number. Used to configure an embedded LDAP server, for example. + + + - - - Specifies a URL. - - + + + Specifies a URL. + + + - - - A bean identifier, used for referring to the bean elsewhere in the context. - - + + + A bean identifier, used for referring to the bean elsewhere in the context. + + + - - - A bean identifier, used for referring to the bean elsewhere in the context. - - + + + A bean identifier, used for referring to the bean elsewhere in the context. + + + - - - Defines a reference to a Spring bean Id. - - + + + Defines a reference to a Spring bean Id. + + + - - - Defines a reference to a cache for use with a UserDetailsService. - - + + + Defines a reference to a cache for use with a UserDetailsService. + + + - - - A reference to a user-service (or UserDetailsService bean) Id - - + + + A reference to a user-service (or UserDetailsService bean) Id + + + - - - A reference to an AuthenticationManager bean - - + + + A reference to an AuthenticationManager bean + + + - + + + A reference to a DataSource bean + + + + + - A reference to a DataSource bean + Enables Spring Security debugging infrastructure. This will provide human-readable + (multi-line) debugging information to monitor requests coming into the security filters. + This may include sensitive information, such as request parameters or headers, and should + only be used in a development environment. + - - - - Enables Spring Security debugging infrastructure. This will provide human-readable (multi-line) debugging information to monitor requests coming into the security filters. This may include sensitive information, such as request parameters or headers, and should only be used in a development environment. - + + - - - Defines a reference to a Spring bean Id. - - - - - Defines the hashing algorithm used on user passwords. We recommend strongly against using MD4, as it is a very weak hashing algorithm. - - - - - - - - - - - - - - - - Whether a string should be base64 encoded - - + + + Defines a reference to a Spring bean Id. + + + + + + Defines the hashing algorithm used on user passwords. We recommend strongly against using + MD4, as it is a very weak hashing algorithm. + + + + + + + + + + + + + + + + + Whether a string should be base64 encoded + + + - - - A property of the UserDetails object which will be used as salt by a password encoder. Typically something like "username" might be used. - - + + + A property of the UserDetails object which will be used as salt by a password encoder. + Typically something like "username" might be used. + + + - - - A single value that will be used as the salt for a password encoder. - - + + + A single value that will be used as the salt for a password encoder. + + + - - - A non-empty string prefix that will be added to role strings loaded from persistent storage (e.g. "ROLE_"). Use the value "none" for no prefix in cases where the default is non-empty. - - + + + A non-empty string prefix that will be added to role strings loaded from persistent + storage (e.g. "ROLE_"). Use the value "none" for no prefix in cases where the default is + non-empty. + + + - - - Enables the use of expressions in the 'access' attributes in <intercept-url> elements rather than the traditional list of configuration attributes. Defaults to 'false'. If enabled, each attribute should contain a single boolean expression. If the expression evaluates to 'true', access will be granted. - - + + + Enables the use of expressions in the 'access' attributes in <intercept-url> elements + rather than the traditional list of configuration attributes. Defaults to 'false'. If + enabled, each attribute should contain a single boolean expression. If the expression + evaluates to 'true', access will be granted. + + + - - Defines an LDAP server location or starts an embedded server. The url indicates the location of a remote server. If no url is given, an embedded server will be started, listening on the supplied port number. The port is optional and defaults to 33389. A Spring LDAP ContextSource bean will be registered for the server with the id supplied. - - - - - - - A bean identifier, used for referring to the bean elsewhere in the context. - - - + - Specifies a URL. + Defines an LDAP server location or starts an embedded server. The url indicates the + location of a remote server. If no url is given, an embedded server will be started, + listening on the supplied port number. The port is optional and defaults to 33389. A + Spring LDAP ContextSource bean will be registered for the server with the id supplied. + - - - - Specifies an IP port number. Used to configure an embedded LDAP server, for example. - - - - - Username (DN) of the "manager" user identity which will be used to authenticate to a (non-embedded) LDAP server. If omitted, anonymous access will be used. - - - - - The password for the manager DN. This is required if the manager-dn is specified. - - - - - Explicitly specifies an ldif file resource to load into an embedded LDAP server. The default is classpath*:*.ldiff - - - - - Optional root suffix for the embedded LDAP server. Default is "dc=springframework,dc=org" - - + + + + + + + + A bean identifier, used for referring to the bean elsewhere in the context. + + + + + + Specifies a URL. + + + + + + Specifies an IP port number. Used to configure an embedded LDAP server, for example. + + + + + + Username (DN) of the "manager" user identity which will be used to authenticate to a + (non-embedded) LDAP server. If omitted, anonymous access will be used. + + + + + + The password for the manager DN. This is required if the manager-dn is specified. + + + + + + Explicitly specifies an ldif file resource to load into an embedded LDAP server. The + default is classpath*:*.ldiff + + + + + + Optional root suffix for the embedded LDAP server. Default is "dc=springframework,dc=org" + + + - - - The optional server to use. If omitted, and a default LDAP server is registered (using <ldap-server> with no Id), that server will be used. - - + + + The optional server to use. If omitted, and a default LDAP server is registered (using + <ldap-server> with no Id), that server will be used. + + + - - - Group search filter. Defaults to (uniqueMember={0}). The substituted parameter is the DN of the user. - - + + + Group search filter. Defaults to (uniqueMember={0}). The substituted parameter is the DN + of the user. + + + - - - Search base for group membership searches. Defaults to "" (searching from the root). - - + + + Search base for group membership searches. Defaults to "" (searching from the root). + + + - - - The LDAP filter used to search for users (optional). For example "(uid={0})". The substituted parameter is the user's login name. - - + + + The LDAP filter used to search for users (optional). For example "(uid={0})". The + substituted parameter is the user's login name. + + + - - - Search base for user searches. Defaults to "". Only used with a 'user-search-filter'. - - + + + Search base for user searches. Defaults to "". Only used with a 'user-search-filter'. + + + - - - The LDAP attribute name which contains the role name which will be used within Spring Security. Defaults to "cn". - - + + + The LDAP attribute name which contains the role name which will be used within Spring + Security. Defaults to "cn". + + + - - - Allows the objectClass of the user entry to be specified. If set, the framework will attempt to load standard attributes for the defined class into the returned UserDetails object - - - - - - - - + + + Allows the objectClass of the user entry to be specified. If set, the framework will + attempt to load standard attributes for the defined class into the returned UserDetails + object + + + + + + + + + - - - Allows explicit customization of the loaded user object by specifying a UserDetailsContextMapper bean which will be called with the context information from the user's directory entry - - + + + Allows explicit customization of the loaded user object by specifying a + UserDetailsContextMapper bean which will be called with the context information from the + user's directory entry + + + - - This element configures a LdapUserDetailsService which is a combination of a FilterBasedLdapUserSearch and a DefaultLdapAuthoritiesPopulator. - - - - - - - A bean identifier, used for referring to the bean elsewhere in the context. - - - - - The optional server to use. If omitted, and a default LDAP server is registered (using <ldap-server> with no Id), that server will be used. - - - - - The LDAP filter used to search for users (optional). For example "(uid={0})". The substituted parameter is the user's login name. - - - - - Search base for user searches. Defaults to "". Only used with a 'user-search-filter'. - - - - - Group search filter. Defaults to (uniqueMember={0}). The substituted parameter is the DN of the user. - - - - - Search base for group membership searches. Defaults to "" (searching from the root). - - - - - The LDAP attribute name which contains the role name which will be used within Spring Security. Defaults to "cn". - - - - - Defines a reference to a cache for use with a UserDetailsService. - - - - - A non-empty string prefix that will be added to role strings loaded from persistent storage (e.g. "ROLE_"). Use the value "none" for no prefix in cases where the default is non-empty. - - - - - Allows the objectClass of the user entry to be specified. If set, the framework will attempt to load standard attributes for the defined class into the returned UserDetails object - - - - - - - - - + - Allows explicit customization of the loaded user object by specifying a UserDetailsContextMapper bean which will be called with the context information from the user's directory entry + This element configures a LdapUserDetailsService which is a combination of a + FilterBasedLdapUserSearch and a DefaultLdapAuthoritiesPopulator. + - + + + + + + + + A bean identifier, used for referring to the bean elsewhere in the context. + + + + + + The optional server to use. If omitted, and a default LDAP server is registered (using + <ldap-server> with no Id), that server will be used. + + + + + + The LDAP filter used to search for users (optional). For example "(uid={0})". The + substituted parameter is the user's login name. + + + + + + Search base for user searches. Defaults to "". Only used with a 'user-search-filter'. + + + + + + Group search filter. Defaults to (uniqueMember={0}). The substituted parameter is the DN + of the user. + + + + + + Search base for group membership searches. Defaults to "" (searching from the root). + + + + + + The LDAP attribute name which contains the role name which will be used within Spring + Security. Defaults to "cn". + + + + + + Defines a reference to a cache for use with a UserDetailsService. + + + + + + A non-empty string prefix that will be added to role strings loaded from persistent + storage (e.g. "ROLE_"). Use the value "none" for no prefix in cases where the default is + non-empty. + + + + + + Allows the objectClass of the user entry to be specified. If set, the framework will + attempt to load standard attributes for the defined class into the returned UserDetails + object + + + + + + + + + + + + Allows explicit customization of the loaded user object by specifying a + UserDetailsContextMapper bean which will be called with the context information from the + user's directory entry + + + - - - The optional server to use. If omitted, and a default LDAP server is registered (using <ldap-server> with no Id), that server will be used. - - - - - Search base for user searches. Defaults to "". Only used with a 'user-search-filter'. - - - - - The LDAP filter used to search for users (optional). For example "(uid={0})". The substituted parameter is the user's login name. - - - - - Search base for group membership searches. Defaults to "" (searching from the root). - - - - - Group search filter. Defaults to (uniqueMember={0}). The substituted parameter is the DN of the user. - - - - - The LDAP attribute name which contains the role name which will be used within Spring Security. Defaults to "cn". - - - - - A specific pattern used to build the user's DN, for example "uid={0},ou=people". The key "{0}" must be present and will be substituted with the username. - - - - - A non-empty string prefix that will be added to role strings loaded from persistent storage (e.g. "ROLE_"). Use the value "none" for no prefix in cases where the default is non-empty. - - - - - Allows the objectClass of the user entry to be specified. If set, the framework will attempt to load standard attributes for the defined class into the returned UserDetails object - - - - - - - - - - - Allows explicit customization of the loaded user object by specifying a UserDetailsContextMapper bean which will be called with the context information from the user's directory entry - - + + + The optional server to use. If omitted, and a default LDAP server is registered (using + <ldap-server> with no Id), that server will be used. + + + + + + Search base for user searches. Defaults to "". Only used with a 'user-search-filter'. + + + + + + The LDAP filter used to search for users (optional). For example "(uid={0})". The + substituted parameter is the user's login name. + + + + + + Search base for group membership searches. Defaults to "" (searching from the root). + + + + + + Group search filter. Defaults to (uniqueMember={0}). The substituted parameter is the DN + of the user. + + + + + + The LDAP attribute name which contains the role name which will be used within Spring + Security. Defaults to "cn". + + + + + + A specific pattern used to build the user's DN, for example "uid={0},ou=people". The key + "{0}" must be present and will be substituted with the username. + + + + + + A non-empty string prefix that will be added to role strings loaded from persistent + storage (e.g. "ROLE_"). Use the value "none" for no prefix in cases where the default is + non-empty. + + + + + + Allows the objectClass of the user entry to be specified. If set, the framework will + attempt to load standard attributes for the defined class into the returned UserDetails + object + + + + + + + + + + + + Allows explicit customization of the loaded user object by specifying a + UserDetailsContextMapper bean which will be called with the context information from the + user's directory entry + + + - - - The attribute in the directory which contains the user password. Defaults to "userPassword". - - - - - Defines the hashing algorithm used on user passwords. We recommend strongly against using MD4, as it is a very weak hashing algorithm. - - - - - - - - - - - - - - - - Can be used inside a bean definition to add a security interceptor to the bean and set up access configuration attributes for the bean's methods - - - - Defines a protected method and the access control configuration attributes that apply to it. We strongly advise you NOT to mix "protect" declarations with any services provided "global-method-security". - - - - - - + + + The attribute in the directory which contains the user password. Defaults to + "userPassword". + + + + + + Defines the hashing algorithm used on user passwords. We recommend strongly against using + MD4, as it is a very weak hashing algorithm. + + + + + + + + + + + + + + + + + + Can be used inside a bean definition to add a security interceptor to the bean and set up + access configuration attributes for the bean's methods + + + + + + + Defines a protected method and the access control configuration attributes that apply to + it. We strongly advise you NOT to mix "protect" declarations with any services provided + "global-method-security". + + + + + + + + + + - - - Optional AccessDecisionManager bean ID to be used by the created method security interceptor. - - + + + Optional AccessDecisionManager bean ID to be used by the created method security + interceptor. + + + - - - A method name - - - - - Access configuration attributes list that applies to the method, e.g. "ROLE_A,ROLE_B". - - - - - Creates a MethodSecurityMetadataSource instance - - - - Defines a protected method and the access control configuration attributes that apply to it. We strongly advise you NOT to mix "protect" declarations with any services provided "global-method-security". - - - - - - + + + A method name + + + + + + Access configuration attributes list that applies to the method, e.g. "ROLE_A,ROLE_B". + + + + + + + Creates a MethodSecurityMetadataSource instance + + + + + + + Defines a protected method and the access control configuration attributes that apply to + it. We strongly advise you NOT to mix "protect" declarations with any services provided + "global-method-security". + + + + + + + + + + - - - A bean identifier, used for referring to the bean elsewhere in the context. - - - - - Enables the use of expressions in the 'access' attributes in <intercept-url> elements rather than the traditional list of configuration attributes. Defaults to 'false'. If enabled, each attribute should contain a single boolean expression. If the expression evaluates to 'true', access will be granted. - - - - - Provides method security for all beans registered in the Spring application context. Specifically, beans will be scanned for matches with the ordered list of "protect-pointcut" sub-elements, Spring Security annotations and/or. Where there is a match, the beans will automatically be proxied and security authorization applied to the methods accordingly. If you use and enable all four sources of method security metadata (ie "protect-pointcut" declarations, expression annotations, @Secured and also JSR250 security annotations), the metadata sources will be queried in that order. In practical terms, this enables you to use XML to override method security metadata expressed in annotations. If using annotations, the order of precedence is EL-based (@PreAuthorize etc.), @Secured and finally JSR-250. - - - - - Allows the default expression-based mechanism for handling Spring Security's pre and post invocation annotations (@PreFilter, @PreAuthorize, @PostFilter, @PostAuthorize) to be replace entirely. Only applies if these annotations are enabled. - - - - Defines the PrePostInvocationAttributeFactory instance which is used to generate pre and post invocation metadata from the annotated methods. - - - - - Customizes the PreInvocationAuthorizationAdviceVoter with the ref as the PreInvocationAuthorizationAdviceVoter for the <pre-post-annotation-handling> element. - - - - - Customizes the PostInvocationAdviceProvider with the ref as the PostInvocationAuthorizationAdvice for the <pre-post-annotation-handling> element. - - - - - - - Defines the SecurityExpressionHandler instance which will be used if expression-based access-control is enabled. A default implementation (with no ACL support) will be used if not supplied. - - - - - - Defines a protected pointcut and the access control configuration attributes that apply to it. Every bean registered in the Spring application context that provides a method that matches the pointcut will receive security authorization. - - - - - Allows addition of extra AfterInvocationProvider beans which should be called by the MethodSecurityInterceptor created by global-method-security. - - - - - - + + + A bean identifier, used for referring to the bean elsewhere in the context. + + + + + + Enables the use of expressions in the 'access' attributes in <intercept-url> elements + rather than the traditional list of configuration attributes. Defaults to 'false'. If + enabled, each attribute should contain a single boolean expression. If the expression + evaluates to 'true', access will be granted. + + + + + + + Provides method security for all beans registered in the Spring application context. + Specifically, beans will be scanned for matches with the ordered list of + "protect-pointcut" sub-elements, Spring Security annotations and/or. Where there is a + match, the beans will automatically be proxied and security authorization applied to the + methods accordingly. If you use and enable all four sources of method security metadata + (ie "protect-pointcut" declarations, expression annotations, @Secured and also JSR250 + security annotations), the metadata sources will be queried in that order. In practical + terms, this enables you to use XML to override method security metadata expressed in + annotations. If using annotations, the order of precedence is EL-based (@PreAuthorize + etc.), @Secured and finally JSR-250. + + + + + + + + Allows the default expression-based mechanism for handling Spring Security's pre and post + invocation annotations (@PreFilter, @PreAuthorize, @PostFilter, @PostAuthorize) to be + replace entirely. Only applies if these annotations are enabled. + + + + + + + Defines the PrePostInvocationAttributeFactory instance which is used to generate pre and + post invocation metadata from the annotated methods. + + + + + + + + + Customizes the PreInvocationAuthorizationAdviceVoter with the ref as the + PreInvocationAuthorizationAdviceVoter for the <pre-post-annotation-handling> element. + + + + + + + + + Customizes the PostInvocationAdviceProvider with the ref as the + PostInvocationAuthorizationAdvice for the <pre-post-annotation-handling> element. + + + + + + + + + + + + Defines the SecurityExpressionHandler instance which will be used if expression-based + access-control is enabled. A default implementation (with no ACL support) will be used if + not supplied. + + + + + + + + + + Defines a protected pointcut and the access control configuration attributes that apply to + it. Every bean registered in the Spring application context that provides a method that + matches the pointcut will receive security authorization. + + + + + + + + + Allows addition of extra AfterInvocationProvider beans which should be called by the + MethodSecurityInterceptor created by global-method-security. + + + + + + + + + + - - - Specifies whether the use of Spring Security's pre and post invocation annotations (@PreFilter, @PreAuthorize, @PostFilter, @PostAuthorize) should be enabled for this application context. Defaults to "disabled". - - - - - - - - - - - Specifies whether the use of Spring Security's @Secured annotations should be enabled for this application context. Defaults to "disabled". - - - - - - - - - - - Specifies whether JSR-250 style attributes are to be used (for example "RolesAllowed"). This will require the javax.annotation.security classes on the classpath. Defaults to "disabled". - - - - - - - - - - - Optional AccessDecisionManager bean ID to override the default used for method security. - - - - - Optional RunAsmanager implementation which will be used by the configured MethodSecurityInterceptor - - - - - Allows the advice "order" to be set for the method security interceptor. - - - - - If true, class based proxying will be used instead of interface based proxying. - - - - - Can be used to specify that AspectJ should be used instead of the default Spring AOP. If set, secured classes must be woven with the AnnotationSecurityAspect from the spring-security-aspects module. - - - - - - - - - - An external MethodSecurityMetadataSource instance can be supplied which will take priority over other sources (such as the default annotations). - - - - - A reference to an AuthenticationManager bean - - + + + Specifies whether the use of Spring Security's pre and post invocation annotations + (@PreFilter, @PreAuthorize, @PostFilter, @PostAuthorize) should be enabled for this + application context. Defaults to "disabled". + + + + + + + + + + + + Specifies whether the use of Spring Security's @Secured annotations should be enabled for + this application context. Defaults to "disabled". + + + + + + + + + + + + Specifies whether JSR-250 style attributes are to be used (for example "RolesAllowed"). + This will require the javax.annotation.security classes on the classpath. Defaults to + "disabled". + + + + + + + + + + + + Optional AccessDecisionManager bean ID to override the default used for method security. + + + + + + Optional RunAsmanager implementation which will be used by the configured + MethodSecurityInterceptor + + + + + + Allows the advice "order" to be set for the method security interceptor. + + + + + + If true, class based proxying will be used instead of interface based proxying. + + + + + + Can be used to specify that AspectJ should be used instead of the default Spring AOP. If + set, secured classes must be woven with the AnnotationSecurityAspect from the + spring-security-aspects module. + + + + + + + + + + + An external MethodSecurityMetadataSource instance can be supplied which will take priority + over other sources (such as the default annotations). + + + + + + A reference to an AuthenticationManager bean + + + @@ -615,1044 +838,1481 @@ - - - An AspectJ expression, including the 'execution' keyword. For example, 'execution(int com.foo.TargetObject.countLength(String))' (without the quotes). - - - - - Access configuration attributes list that applies to all methods matching the pointcut, e.g. "ROLE_A,ROLE_B" - - + + + An AspectJ expression, including the 'execution' keyword. For example, 'execution(int + com.foo.TargetObject.countLength(String))' (without the quotes). + + + + + + Access configuration attributes list that applies to all methods matching the pointcut, + e.g. "ROLE_A,ROLE_B" + + + - - Allows a custom instance of HttpFirewall to be injected into the FilterChainProxy created by the namespace. - - - - - Container element for HTTP security configuration. Multiple elements can now be defined, each with a specific pattern to which the enclosed security configuration applies. A pattern can also be configured to bypass Spring Security's filters completely by setting the "secured" attribute to "false". - - - - Specifies the access attributes and/or filter list for a particular set of URLs. - - - - - Defines the access-denied strategy that should be used. An access denied page can be defined or a reference to an AccessDeniedHandler instance. - - - - - Sets up a form login configuration for authentication with a username and password - - - - - Sets up form login for authentication with an Open ID identity - - - - - - - - A reference to a user-service (or UserDetailsService bean) Id - - - - - Adds support for X.509 client authentication. - - - - - - Adds support for basic authentication - - - - - Incorporates a logout processing filter. Most web applications require a logout filter, although you may not require one if you write a controller to provider similar logic. - - - - - Session-management related functionality is implemented by the addition of a SessionManagementFilter to the filter stack. - - - - Enables concurrent session control, limiting the number of authenticated sessions a user may have at the same time. - - - - - - - - Sets up remember-me authentication. If used with the "key" attribute (or no attributes) the cookie-only implementation will be used. Specifying "token-repository-ref" or "remember-me-data-source-ref" will use the more secure, persisten token approach. - - - - - Adds support for automatically granting all anonymous web requests a particular principal identity and a corresponding granted authority. - - - - - Defines the list of mappings between http and https ports for use in redirects - - - - Provides a method to map http ports to https ports when forcing a redirect. - - - - - - - - - - Defines the SecurityExpressionHandler instance which will be used if expression-based access-control is enabled. A default implementation (with no ACL support) will be used if not supplied. - - - - - - + + + Allows a custom instance of HttpFirewall to be injected into the FilterChainProxy created + by the namespace. + + + + + + + + + Container element for HTTP security configuration. Multiple elements can now be defined, + each with a specific pattern to which the enclosed security configuration applies. A + pattern can also be configured to bypass Spring Security's filters completely by setting + the "secured" attribute to "false". + + + + + + + Specifies the access attributes and/or filter list for a particular set of URLs. + + + + + + + + + Defines the access-denied strategy that should be used. An access denied page can be + defined or a reference to an AccessDeniedHandler instance. + + + + + + + + + Sets up a form login configuration for authentication with a username and password + + + + + + + + + Sets up form login for authentication with an Open ID identity + + + + + + + + + + A reference to a user-service (or UserDetailsService bean) Id + + + + + + + + Adds support for X.509 client authentication. + + + + + + + + + + Adds support for basic authentication + + + + + + + + + Incorporates a logout processing filter. Most web applications require a logout filter, + although you may not require one if you write a controller to provider similar logic. + + + + + + + + + Session-management related functionality is implemented by the addition of a + SessionManagementFilter to the filter stack. + + + + + + + Enables concurrent session control, limiting the number of authenticated sessions a user + may have at the same time. + + + + + + + + + + + + + Sets up remember-me authentication. If used with the "key" attribute (or no attributes) + the cookie-only implementation will be used. Specifying "token-repository-ref" or + "remember-me-data-source-ref" will use the more secure, persisten token approach. + + + + + + + + + Adds support for automatically granting all anonymous web requests a particular principal + identity and a corresponding granted authority. + + + + + + + + + Defines the list of mappings between http and https ports for use in redirects + + + + + + + Provides a method to map http ports to https ports when forcing a redirect. + + + + + + + + + + + + + + + Defines the SecurityExpressionHandler instance which will be used if expression-based + access-control is enabled. A default implementation (with no ACL support) will be used if + not supplied. + + + + + + + + + + - - - The request URL pattern which will be mapped to the filter chain created by this <http> element. If omitted, the filter chain will match all requests. - - - - - When set to 'none', requests matching the pattern attribute will be ignored by Spring Security. No security filters will be applied and no SecurityContext will be available. If set, the <http> element must be empty, with no children. - - - - - - - - - - Allows a RequestMatcher instance to be used, as an alternative to pattern-matching. - - - - - Automatically registers a login form, BASIC authentication, anonymous authentication, logout services, remember-me and servlet-api-integration. If set to "true", all of these capabilities are added (although you can still customize the configuration of each by providing the respective element). If unspecified, defaults to "false". - - - - - Enables the use of expressions in the 'access' attributes in <intercept-url> elements rather than the traditional list of configuration attributes. Defaults to 'false'. If enabled, each attribute should contain a single boolean expression. If the expression evaluates to 'true', access will be granted. - - - - - Controls the eagerness with which an HTTP session is created by Spring Security classes. If not set, defaults to "ifRequired". If "stateless" is used, this implies that the application guarantees that it will not create a session. This differs from the use of "never" which mans that Spring Security will not create a session, but will make use of one if the application does. - - - - - - - - - - - - - A reference to a SecurityContextRepository bean. This can be used to customize how the SecurityContext is stored between requests. - - - - - Supersedes the 'path-type' attribute. Defines the strategy use for matching incoming requests. Currently the options are 'ant' (for ant path patterns), 'regex' for regular expressions and 'ciRegex' for case-insensitive regular expressions. - - - - - - - - - - - - Deprecated. Use request-matcher instead. - - - - - - - - - - - Provides versions of HttpServletRequest security methods such as isUserInRole() and getPrincipal() which are implemented by accessing the Spring SecurityContext. Defaults to "true". - - - - - If available, runs the request as the Subject acquired from the JaasAuthenticationToken. Defaults to "false". - - - - - Optional attribute specifying the ID of the AccessDecisionManager implementation which should be used for authorizing HTTP requests. - - - - - Optional attribute specifying the realm name that will be used for all authentication features that require a realm name (eg BASIC and Digest authentication). If unspecified, defaults to "Spring Security Application". - - - - - Allows a customized AuthenticationEntryPoint to be set on the ExceptionTranslationFilter. - - - - - Corresponds to the observeOncePerRequest property of FilterSecurityInterceptor. Defaults to "true" - - - - - Deprecated in favour of the access-denied-handler element. - - - - - Prevents the jsessionid parameter from being added to rendered URLs. - - - - - A bean identifier, used for referring to the bean elsewhere in the context. - - - - - A reference to an AuthenticationManager bean - - + + + The request URL pattern which will be mapped to the filter chain created by this <http> + element. If omitted, the filter chain will match all requests. + + + + + + When set to 'none', requests matching the pattern attribute will be ignored by Spring + Security. No security filters will be applied and no SecurityContext will be available. If + set, the <http> element must be empty, with no children. + + + + + + + + + + + Allows a RequestMatcher instance to be used, as an alternative to pattern-matching. + + + + + + Automatically registers a login form, BASIC authentication, anonymous authentication, + logout services, remember-me and servlet-api-integration. If set to "true", all of these + capabilities are added (although you can still customize the configuration of each by + providing the respective element). If unspecified, defaults to "false". + + + + + + Enables the use of expressions in the 'access' attributes in <intercept-url> elements + rather than the traditional list of configuration attributes. Defaults to 'false'. If + enabled, each attribute should contain a single boolean expression. If the expression + evaluates to 'true', access will be granted. + + + + + + Controls the eagerness with which an HTTP session is created by Spring Security classes. + If not set, defaults to "ifRequired". If "stateless" is used, this implies that the + application guarantees that it will not create a session. This differs from the use of + "never" which mans that Spring Security will not create a session, but will make use of + one if the application does. + + + + + + + + + + + + + + A reference to a SecurityContextRepository bean. This can be used to customize how the + SecurityContext is stored between requests. + + + + + + Supersedes the 'path-type' attribute. Defines the strategy use for matching incoming + requests. Currently the options are 'ant' (for ant path patterns), 'regex' for regular + expressions and 'ciRegex' for case-insensitive regular expressions. + + + + + + + + + + + + + Deprecated. Use request-matcher instead. + + + + + + + + + + + + Provides versions of HttpServletRequest security methods such as isUserInRole() and + getPrincipal() which are implemented by accessing the Spring SecurityContext. Defaults to + "true". + + + + + + If available, runs the request as the Subject acquired from the JaasAuthenticationToken. + Defaults to "false". + + + + + + Optional attribute specifying the ID of the AccessDecisionManager implementation which + should be used for authorizing HTTP requests. + + + + + + Optional attribute specifying the realm name that will be used for all authentication + features that require a realm name (eg BASIC and Digest authentication). If unspecified, + defaults to "Spring Security Application". + + + + + + Allows a customized AuthenticationEntryPoint to be set on the ExceptionTranslationFilter. + + + + + + Corresponds to the observeOncePerRequest property of FilterSecurityInterceptor. Defaults + to "true" + + + + + + Deprecated in favour of the access-denied-handler element. + + + + + + Prevents the jsessionid parameter from being added to rendered URLs. + + + + + + A bean identifier, used for referring to the bean elsewhere in the context. + + + + + + A reference to an AuthenticationManager bean + + + - - - Defines a reference to a Spring bean Id. - - - - - The access denied page that an authenticated user will be redirected to if they request a page which they don't have the authority to access. - - + + + Defines a reference to a Spring bean Id. + + + + + + The access denied page that an authenticated user will be redirected to if they request a + page which they don't have the authority to access. + + + - - - The access denied page that an authenticated user will be redirected to if they request a page which they don't have the authority to access. - - + + + The access denied page that an authenticated user will be redirected to if they request a + page which they don't have the authority to access. + + + - - - The pattern which defines the URL path. The content will depend on the type set in the containing http element, so will default to ant path syntax. - - - - - The access configuration attributes that apply for the configured path. - - - - - The HTTP Method for which the access configuration attributes should apply. If not specified, the attributes will apply to any method. - - - - - - - - - - - - - - - - The filter list for the path. Currently can be set to "none" to remove a path from having any filters applied. The full filter stack (consisting of all filters created by the namespace configuration, and any added using 'custom-filter'), will be applied to any other paths. - - - - - - - - - - Used to specify that a URL must be accessed over http or https, or that there is no preference. The value should be "http", "https" or "any", respectively. - - + + + The pattern which defines the URL path. The content will depend on the type set in the + containing http element, so will default to ant path syntax. + + + + + + The access configuration attributes that apply for the configured path. + + + + + + The HTTP Method for which the access configuration attributes should apply. If not + specified, the attributes will apply to any method. + + + + + + + + + + + + + + + + + The filter list for the path. Currently can be set to "none" to remove a path from having + any filters applied. The full filter stack (consisting of all filters created by the + namespace configuration, and any added using 'custom-filter'), will be applied to any + other paths. + + + + + + + + + + + Used to specify that a URL must be accessed over http or https, or that there is no + preference. The value should be "http", "https" or "any", respectively. + + + - - - Specifies the URL that will cause a logout. Spring Security will initialize a filter that responds to this particular URL. Defaults to /j_spring_security_logout if unspecified. - - - - - Specifies the URL to display once the user has logged out. If not specified, defaults to /. - - - - - Specifies whether a logout also causes HttpSession invalidation, which is generally desirable. If unspecified, defaults to true. - - - - - A reference to a LogoutSuccessHandler implementation which will be used to determine the destination to which the user is taken after logging out. - - - + + + Specifies the URL that will cause a logout. Spring Security will initialize a filter that + responds to this particular URL. Defaults to /j_spring_security_logout if unspecified. + + + + + + Specifies the URL to display once the user has logged out. If not specified, defaults to + /. + + + + + + Specifies whether a logout also causes HttpSession invalidation, which is generally + desirable. If unspecified, defaults to true. + + + + + + A reference to a LogoutSuccessHandler implementation which will be used to determine the + destination to which the user is taken after logging out. + + + + + + A comma-separated list of the names of cookies which should be deleted when the user logs + out + + + + + - A comma-separated list of the names of cookies which should be deleted when the user logs out + Allow the RequestCache used for saving requests during the login process to be set + - - - - Allow the RequestCache used for saving requests during the login process to be set - - - + + + + - - - The URL that the login form is posted to. If unspecified, it defaults to /j_spring_security_check. - - - - - The name of the request parameter which contains the username. Defaults to 'j_username'. - - - - - The name of the request parameter which contains the password. Defaults to 'j_password'. - - - - - The URL that will be redirected to after successful authentication, if the user's previous action could not be resumed. This generally happens if the user visits a login page without having first requested a secured operation that triggers authentication. If unspecified, defaults to the root of the application. - - - - - Whether the user should always be redirected to the default-target-url after login. - - - - - The URL for the login page. If no login URL is specified, Spring Security will automatically create a login URL at /spring_security_login and a corresponding filter to render that login URL when requested. - - - - - The URL for the login failure page. If no login failure URL is specified, Spring Security will automatically create a failure login URL at /spring_security_login?login_error and a corresponding filter to render that login failure URL when requested. - - - - - Reference to an AuthenticationSuccessHandler bean which should be used to handle a successful authentication request. Should not be used in combination with default-target-url (or always-use-default-target-url) as the implementation should always deal with navigation to the subsequent destination - - - - - Reference to an AuthenticationFailureHandler bean which should be used to handle a failed authentication request. Should not be used in combination with authentication-failure-url as the implementation should always deal with navigation to the subsequent destination - - - - - Reference to an AuthenticationDetailsSource which will be used by the authentication filter - - + + + The URL that the login form is posted to. If unspecified, it defaults to + /j_spring_security_check. + + + + + + The name of the request parameter which contains the username. Defaults to 'j_username'. + + + + + + The name of the request parameter which contains the password. Defaults to 'j_password'. + + + + + + The URL that will be redirected to after successful authentication, if the user's previous + action could not be resumed. This generally happens if the user visits a login page + without having first requested a secured operation that triggers authentication. If + unspecified, defaults to the root of the application. + + + + + + Whether the user should always be redirected to the default-target-url after login. + + + + + + The URL for the login page. If no login URL is specified, Spring Security will + automatically create a login URL at /spring_security_login and a corresponding filter to + render that login URL when requested. + + + + + + The URL for the login failure page. If no login failure URL is specified, Spring Security + will automatically create a failure login URL at /spring_security_login?login_error and a + corresponding filter to render that login failure URL when requested. + + + + + + Reference to an AuthenticationSuccessHandler bean which should be used to handle a + successful authentication request. Should not be used in combination with + default-target-url (or always-use-default-target-url) as the implementation should always + deal with navigation to the subsequent destination + + + + + + Reference to an AuthenticationFailureHandler bean which should be used to handle a failed + authentication request. Should not be used in combination with authentication-failure-url + as the implementation should always deal with navigation to the subsequent destination + + + + + + Reference to an AuthenticationDetailsSource which will be used by the authentication + filter + + + - - Sets up an attribute exchange configuration to request specified attributes from the OpenID identity provider. When multiple elements are used, each must have an identifier-attribute attribute. Each configuration will be matched in turn against the supplied login identifier until a match is found. - - - - - - + + + Sets up an attribute exchange configuration to request specified attributes from the + OpenID identity provider. When multiple elements are used, each must have an + identifier-attribute attribute. Each configuration will be matched in turn against the + supplied login identifier until a match is found. + + + + + + + + + - - - A regular expression which will be compared against the claimed identity, when deciding which attribute-exchange configuration to use during authentication. - - + + + A regular expression which will be compared against the claimed identity, when deciding + which attribute-exchange configuration to use during authentication. + + + - - Attributes used when making an OpenID AX Fetch Request - - - - - - - Specifies the name of the attribute that you wish to get back. For example, email. - - - + - Specifies the attribute type. For example, http://axschema.org/contact/email. See your OP's documentation for valid attribute types. + Attributes used when making an OpenID AX Fetch Request + - - - - Specifies if this attribute is required to the OP, but does not error out if the OP does not return the attribute. Default is false. - - - + + + + + + + + Specifies the name of the attribute that you wish to get back. For example, email. + + + + + + Specifies the attribute type. For example, http://axschema.org/contact/email. See your + OP's documentation for valid attribute types. + + + + + + Specifies if this attribute is required to the OP, but does not error out if the OP does + not return the attribute. Default is false. + + + + + + Specifies the number of attributes that you wish to get back. For example, return 3 + emails. The default value is 1. + + + + + - Specifies the number of attributes that you wish to get back. For example, return 3 emails. The default value is 1. + Used to explicitly configure a FilterChainProxy instance with a FilterChainMap + - - - - Used to explicitly configure a FilterChainProxy instance with a FilterChainMap - - - - - - + + + + + + + - - - Deprecated. Use request-matcher instead. - - - - - - - - - + + + Deprecated. Use request-matcher instead. + + + + + + + + + + + + Supersedes the 'path-type' attribute. Defines the strategy use for matching incoming + requests. Currently the options are 'ant' (for ant path patterns), 'regex' for regular + expressions and 'ciRegex' for case-insensitive regular expressions. + + + + + + + + + + + + - Supersedes the 'path-type' attribute. Defines the strategy use for matching incoming requests. Currently the options are 'ant' (for ant path patterns), 'regex' for regular expressions and 'ciRegex' for case-insensitive regular expressions. + Used within to define a specific URL pattern and the list of filters which apply to the + URLs matching that pattern. When multiple filter-chain elements are assembled in a list in + order to configure a FilterChainProxy, the most specific patterns must be placed at the + top of the list, with most general ones at the bottom. + - - - - - - - - - - - Used within to define a specific URL pattern and the list of filters which apply to the URLs matching that pattern. When multiple filter-chain elements are assembled in a list in order to configure a FilterChainProxy, the most specific patterns must be placed at the top of the list, with most general ones at the bottom. - - - + + + + - - - The request URL pattern which will be mapped to the FilterChain. - - - - - Allows a RequestMatcher instance to be used, as an alternative to pattern-matching. - - - - - A comma separated list of bean names that implement Filter that should be processed for this FilterChain. If the value is none, then no Filters will be used for this FilterChain. - - + + + The request URL pattern which will be mapped to the FilterChain. + + + + + + Allows a RequestMatcher instance to be used, as an alternative to pattern-matching. + + + + + + A comma separated list of bean names that implement Filter that should be processed for + this FilterChain. If the value is none, then no Filters will be used for this FilterChain. + + + - - - The request URL pattern which will be mapped to the FilterChain. - - + + + The request URL pattern which will be mapped to the FilterChain. + + + - - - Allows a RequestMatcher instance to be used, as an alternative to pattern-matching. - - - - - Used to explicitly configure a FilterSecurityMetadataSource bean for use with a FilterSecurityInterceptor. Usually only needed if you are configuring a FilterChainProxy explicitly, rather than using the <http> element. The intercept-url elements used should only contain pattern, method and access attributes. Any others will result in a configuration error. - - - - Specifies the access attributes and/or filter list for a particular set of URLs. - - - - - - + + + Allows a RequestMatcher instance to be used, as an alternative to pattern-matching. + + + + + + + Used to explicitly configure a FilterSecurityMetadataSource bean for use with a + FilterSecurityInterceptor. Usually only needed if you are configuring a FilterChainProxy + explicitly, rather than using the <http> element. The intercept-url elements used should + only contain pattern, method and access attributes. Any others will result in a + configuration error. + + + + + + + Specifies the access attributes and/or filter list for a particular set of URLs. + + + + + + + + + + - - - Enables the use of expressions in the 'access' attributes in <intercept-url> elements rather than the traditional list of configuration attributes. Defaults to 'false'. If enabled, each attribute should contain a single boolean expression. If the expression evaluates to 'true', access will be granted. - - - - - A bean identifier, used for referring to the bean elsewhere in the context. - - - - - Compare after forcing to lowercase - - - - - Deprecated. Use request-matcher instead. - - - - - - - - - - - Supersedes the 'path-type' attribute. Defines the strategy use for matching incoming requests. Currently the options are 'ant' (for ant path patterns), 'regex' for regular expressions and 'ciRegex' for case-insensitive regular expressions. - - - - - - - - - - - - Deprecated synonym for filter-security-metadata-source - - - - Specifies the access attributes and/or filter list for a particular set of URLs. - - - - - - + + + Enables the use of expressions in the 'access' attributes in <intercept-url> elements + rather than the traditional list of configuration attributes. Defaults to 'false'. If + enabled, each attribute should contain a single boolean expression. If the expression + evaluates to 'true', access will be granted. + + + + + + A bean identifier, used for referring to the bean elsewhere in the context. + + + + + + Compare after forcing to lowercase + + + + + + Deprecated. Use request-matcher instead. + + + + + + + + + + + + Supersedes the 'path-type' attribute. Defines the strategy use for matching incoming + requests. Currently the options are 'ant' (for ant path patterns), 'regex' for regular + expressions and 'ciRegex' for case-insensitive regular expressions. + + + + + + + + + + + + + + Deprecated synonym for filter-security-metadata-source + + + + + + + Specifies the access attributes and/or filter list for a particular set of URLs. + + + + + + + + + + - - - Sets the AuthenticationEntryPoint which is used by the BasicAuthenticationFilter. - - - - - Reference to an AuthenticationDetailsSource which will be used by the authentication filter - - + + + Sets the AuthenticationEntryPoint which is used by the BasicAuthenticationFilter. + + + + + + Reference to an AuthenticationDetailsSource which will be used by the authentication + filter + + + - - - Indicates whether an existing session should be invalidated when a user authenticates and a new session started. If set to "none" no change will be made. "newSession" will create a new empty session. "migrateSession" will create a new session and copy the session attributes to the new session. Defaults to "migrateSession". - - - - - - - - - - - - The URL to which a user will be redirected if they submit an invalid session indentifier. Typically used to detect session timeouts. - - - - - Allows injection of the SessionAuthenticationStrategy instance used by the SessionManagementFilter - - - - - Defines the URL of the error page which should be shown when the SessionAuthenticationStrategy raises an exception. If not set, an unauthorized (402) error code will be returned to the client. Note that this attribute doesn't apply if the error occurs during a form-based login, where the URL for authentication failure will take precedence. - - + + + Indicates whether an existing session should be invalidated when a user authenticates and + a new session started. If set to "none" no change will be made. "newSession" will create a + new empty session. "migrateSession" will create a new session and copy the session + attributes to the new session. Defaults to "migrateSession". + + + + + + + + + + + + + The URL to which a user will be redirected if they submit an invalid session indentifier. + Typically used to detect session timeouts. + + + + + + Allows injection of the SessionAuthenticationStrategy instance used by the + SessionManagementFilter + + + + + + Defines the URL of the error page which should be shown when the + SessionAuthenticationStrategy raises an exception. If not set, an unauthorized (401) error + code will be returned to the client. Note that this attribute doesn't apply if the error + occurs during a form-based login, where the URL for authentication failure will take + precedence. + + + - - - The maximum number of sessions a single authenticated user can have open at the same time. Defaults to "1". - - - - - The URL a user will be redirected to if they attempt to use a session which has been "expired" because they have logged in again. - - - - - Specifies that an unauthorized error should be reported when a user attempts to login when they already have the maximum configured sessions open. The default behaviour is to expire the original session. If the session-authentication-error-url attribute is set on the session-management URL, the user will be redirected to this URL. - - - - - Allows you to define an alias for the SessionRegistry bean in order to access it in your own configuration. - - - - - Allows you to define an external SessionRegistry bean to be used by the concurrency control setup. - - + + + The maximum number of sessions a single authenticated user can have open at the same time. + Defaults to "1". + + + + + + The URL a user will be redirected to if they attempt to use a session which has been + "expired" because they have logged in again. + + + + + + Specifies that an unauthorized error should be reported when a user attempts to login when + they already have the maximum configured sessions open. The default behaviour is to expire + the original session. If the session-authentication-error-url attribute is set on the + session-management URL, the user will be redirected to this URL. + + + + + + Allows you to define an alias for the SessionRegistry bean in order to access it in your + own configuration. + + + + + + Allows you to define an external SessionRegistry bean to be used by the concurrency + control setup. + + + - - - The "key" used to identify cookies from a specific token-based remember-me application. You should set this to a unique value for your application. - - - - - Reference to a PersistentTokenRepository bean for use with the persistent token remember-me implementation. - - - - - A reference to a DataSource bean - - - - - - A reference to a user-service (or UserDetailsService bean) Id - - - - - Exports the internally defined RememberMeServices as a bean alias, allowing it to be used by other beans in the application context. - - - - - Determines whether the "secure" flag will be set on the remember-me cookie. If set to true, the cookie will only be submitted over HTTPS (recommended). By default, secure cookies will be used if the request is made on a secure connection. - - - - - The period (in seconds) for which the remember-me cookie should be valid. - - - - - Reference to an AuthenticationSuccessHandler bean which should be used to handle a successful remember-me authentication. - - + + + The "key" used to identify cookies from a specific token-based remember-me application. + You should set this to a unique value for your application. + + + + + + Reference to a PersistentTokenRepository bean for use with the persistent token + remember-me implementation. + + + + + + A reference to a DataSource bean + + + + + + + A reference to a user-service (or UserDetailsService bean) Id + + + + + + Exports the internally defined RememberMeServices as a bean alias, allowing it to be used + by other beans in the application context. + + + + + + Determines whether the "secure" flag will be set on the remember-me cookie. If set to + true, the cookie will only be submitted over HTTPS (recommended). By default, secure + cookies will be used if the request is made on a secure connection. + + + + + + The period (in seconds) for which the remember-me cookie should be valid. + + + + + + Reference to an AuthenticationSuccessHandler bean which should be used to handle a + successful remember-me authentication. + + + - - - Reference to a PersistentTokenRepository bean for use with the persistent token remember-me implementation. - - + + + Reference to a PersistentTokenRepository bean for use with the persistent token + remember-me implementation. + + + - - - Allows a custom implementation of RememberMeServices to be used. Note that this implementation should return RememberMeAuthenticationToken instances with the same "key" value as specified in the remember-me element. Alternatively it should register its own AuthenticationProvider. It should also implement the LogoutHandler interface, which will be invoked when a user logs out. Typically the remember-me cookie would be removed on logout. - - + + + Allows a custom implementation of RememberMeServices to be used. Note that this + implementation should return RememberMeAuthenticationToken instances with the same "key" + value as specified in the remember-me element. Alternatively it should register its own + AuthenticationProvider. It should also implement the LogoutHandler interface, which will + be invoked when a user logs out. Typically the remember-me cookie would be removed on + logout. + + + - + - - - The key shared between the provider and filter. This generally does not need to be set. If unset, it will default to "doesNotMatter". - - - - - The username that should be assigned to the anonymous request. This allows the principal to be identified, which may be important for logging and auditing. if unset, defaults to "anonymousUser". - - - - - The granted authority that should be assigned to the anonymous request. Commonly this is used to assign the anonymous request particular roles, which can subsequently be used in authorization decisions. If unset, defaults to "ROLE_ANONYMOUS". - - - - - With the default namespace setup, the anonymous "authentication" facility is automatically enabled. You can disable it using this property. - - + + + The key shared between the provider and filter. This generally does not need to be set. If + unset, it will default to "doesNotMatter". + + + + + + The username that should be assigned to the anonymous request. This allows the principal + to be identified, which may be important for logging and auditing. if unset, defaults to + "anonymousUser". + + + + + + The granted authority that should be assigned to the anonymous request. Commonly this is + used to assign the anonymous request particular roles, which can subsequently be used in + authorization decisions. If unset, defaults to "ROLE_ANONYMOUS". + + + + + + With the default namespace setup, the anonymous "authentication" facility is automatically + enabled. You can disable it using this property. + + + - - - The http port to use. - - + + + The http port to use. + + + - - - The https port to use. - - + + + The https port to use. + + + - - - The regular expression used to obtain the username from the certificate's subject. Defaults to matching on the common name using the pattern "CN=(.*?),". - - - - - A reference to a user-service (or UserDetailsService bean) Id - - - - - Reference to an AuthenticationDetailsSource which will be used by the authentication filter - - + + + The regular expression used to obtain the username from the certificate's subject. + Defaults to matching on the common name using the pattern "CN=(.*?),". + + + + + + A reference to a user-service (or UserDetailsService bean) Id + + + + + + Reference to an AuthenticationDetailsSource which will be used by the authentication + filter + + + - - Adds a J2eePreAuthenticatedProcessingFilter to the filter chain to provide integration with container authentication. - - - - - - - A comma-separate list of roles to look for in the incoming HttpServletRequest. - - - + - A reference to a user-service (or UserDetailsService bean) Id + Adds a J2eePreAuthenticatedProcessingFilter to the filter chain to provide integration + with container authentication. + - - - - Registers the AuthenticationManager instance and allows its list of AuthenticationProviders to be defined. Also allows you to define an alias to allow you to reference the AuthenticationManager in your own beans. - - - - Indicates that the contained user-service should be used as an authentication source. - - - - - element which defines a password encoding strategy. Used by an authentication provider to convert submitted passwords to hashed versions, for example. - - - - Password salting strategy. A system-wide constant or a property from the UserDetails object can be used. - - - - A property of the UserDetails object which will be used as salt by a password encoder. Typically something like "username" might be used. - - - - - A single value that will be used as the salt for a password encoder. - + + + + + + + + A comma-separate list of roles to look for in the incoming HttpServletRequest. + + - - - Defines a reference to a Spring bean Id. - - - - - - - - - - - Sets up an ldap authentication provider - - - - Specifies that an LDAP provider should use an LDAP compare operation of the user's password to authenticate the user - - - - element which defines a password encoding strategy. Used by an authentication provider to convert submitted passwords to hashed versions, for example. - - - - Password salting strategy. A system-wide constant or a property from the UserDetails object can be used. - - - - A property of the UserDetails object which will be used as salt by a password encoder. Typically something like "username" might be used. - - - - - A single value that will be used as the salt for a password encoder. - + + + A reference to a user-service (or UserDetailsService bean) Id + + - - - Defines a reference to a Spring bean Id. - - - - - - - - - - - - - - - + + + + Registers the AuthenticationManager instance and allows its list of + AuthenticationProviders to be defined. Also allows you to define an alias to allow you to + reference the AuthenticationManager in your own beans. + + + + + + + Indicates that the contained user-service should be used as an authentication source. + + + + + + + + element which defines a password encoding strategy. Used by an authentication provider to + convert submitted passwords to hashed versions, for example. + + + + + + + Password salting strategy. A system-wide constant or a property from the UserDetails + object can be used. + + + + + + A property of the UserDetails object which will be used as salt by a password encoder. + Typically something like "username" might be used. + + + + + + A single value that will be used as the salt for a password encoder. + + + + + + Defines a reference to a Spring bean Id. + + + + + + + + + + + + + + + + Sets up an ldap authentication provider + + + + + + + Specifies that an LDAP provider should use an LDAP compare operation of the user's + password to authenticate the user + + + + + + + element which defines a password encoding strategy. Used by an authentication provider to + convert submitted passwords to hashed versions, for example. + + + + + + + Password salting strategy. A system-wide constant or a property from the UserDetails + object can be used. + + + + + + A property of the UserDetails object which will be used as salt by a password encoder. + Typically something like "username" might be used. + + + + + + A single value that will be used as the salt for a password encoder. + + + + + + Defines a reference to a Spring bean Id. + + + + + + + + + + + + + + + + + + + + + - - - A bean identifier, used for referring to the bean elsewhere in the context. - - - - - An alias you wish to use for the AuthenticationManager bean (not required it you are using a specific id) - - - - - If set to true, the AuthenticationManger will attempt to clear any credentials data in the returned Authentication object, once the user has been authenticated. - - + + + A bean identifier, used for referring to the bean elsewhere in the context. + + + + + + An alias you wish to use for the AuthenticationManager bean (not required it you are using + a specific id) + + + + + + If set to true, the AuthenticationManger will attempt to clear any credentials data in the + returned Authentication object, once the user has been authenticated. + + + - - - Defines a reference to a Spring bean Id. - - - - - A reference to a user-service (or UserDetailsService bean) Id - - - - - Creates an in-memory UserDetailsService from a properties file or a list of "user" child elements. Usernames are converted to lower-case internally to allow for case-insensitive lookups, so this should not be used if case-sensitivity is required. - - - - Represents a user in the application. - - - - - - - A bean identifier, used for referring to the bean elsewhere in the context. - + + + Defines a reference to a Spring bean Id. + + - - + + + A reference to a user-service (or UserDetailsService bean) Id + + + + + + + Creates an in-memory UserDetailsService from a properties file or a list of "user" child + elements. Usernames are converted to lower-case internally to allow for case-insensitive + lookups, so this should not be used if case-sensitivity is required. + + + + + + + Represents a user in the application. + + + + + + + + + + A bean identifier, used for referring to the bean elsewhere in the context. + + + + + + - - - The location of a Properties file where each line is in the format of username=password,grantedAuthority[,grantedAuthority][,enabled|disabled] - - + + + The location of a Properties file where each line is in the format of + username=password,grantedAuthority[,grantedAuthority][,enabled|disabled] + + + - - - The username assigned to the user. - - - - - The password assigned to the user. This may be hashed if the corresponding authentication provider supports hashing (remember to set the "hash" attribute of the "user-service" element). This attribute be omitted in the case where the data will not be used for authentication, but only for accessing authorities. If omitted, the namespace will generate a random value, preventing its accidental use for authentication. Cannot be empty. - - - - - One of more authorities granted to the user. Separate authorities with a comma (but no space). For example, "ROLE_USER,ROLE_ADMINISTRATOR" - - - - - Can be set to "true" to mark an account as locked and unusable. - - - - - Can be set to "true" to mark an account as disabled and unusable. - - - - - Causes creation of a JDBC-based UserDetailsService. - - - - A bean identifier, used for referring to the bean elsewhere in the context. - + + + The username assigned to the user. + + - - + + + The password assigned to the user. This may be hashed if the corresponding authentication + provider supports hashing (remember to set the "hash" attribute of the "user-service" + element). This attribute be omitted in the case where the data will not be used for + authentication, but only for accessing authorities. If omitted, the namespace will + generate a random value, preventing its accidental use for authentication. Cannot be + empty. + + + + + + One of more authorities granted to the user. Separate authorities with a comma (but no + space). For example, "ROLE_USER,ROLE_ADMINISTRATOR" + + + + + + Can be set to "true" to mark an account as locked and unusable. + + + + + + Can be set to "true" to mark an account as disabled and unusable. + + + + + + + Causes creation of a JDBC-based UserDetailsService. + + + + + + A bean identifier, used for referring to the bean elsewhere in the context. + + + + + + - - - The bean ID of the DataSource which provides the required tables. - - - - - Defines a reference to a cache for use with a UserDetailsService. - - - - - An SQL statement to query a username, password, and enabled status given a username. Default is "select username,password,enabled from users where username = ?" - - - - - An SQL statement to query for a user's granted authorities given a username. The default is "select username, authority from authorities where username = ?" - - - - - An SQL statement to query user's group authorities given a username. The default is "select g.id, g.group_name, ga.authority from groups g, group_members gm, group_authorities ga where gm.username = ? and g.id = ga.group_id and g.id = gm.group_id" - - - - - A non-empty string prefix that will be added to role strings loaded from persistent storage (e.g. "ROLE_"). Use the value "none" for no prefix in cases where the default is non-empty. - - + + + The bean ID of the DataSource which provides the required tables. + + + + + + Defines a reference to a cache for use with a UserDetailsService. + + + + + + An SQL statement to query a username, password, and enabled status given a username. + Default is "select username,password,enabled from users where username = ?" + + + + + + An SQL statement to query for a user's granted authorities given a username. The default + is "select username, authority from authorities where username = ?" + + + + + + An SQL statement to query user's group authorities given a username. The default is + "select g.id, g.group_name, ga.authority from groups g, group_members gm, + group_authorities ga where gm.username = ? and g.id = ga.group_id and g.id = gm.group_id" + + + + + + A non-empty string prefix that will be added to role strings loaded from persistent + storage (e.g. "ROLE_"). Use the value "none" for no prefix in cases where the default is + non-empty. + + + - - Used to indicate that a filter bean declaration should be incorporated into the security filter chain. - - - - - - + - The filter immediately after which the custom-filter should be placed in the chain. This feature will only be needed by advanced users who wish to mix their own filters into the security filter chain and have some knowledge of the standard Spring Security filters. The filter names map to specific Spring Security implementation filters. + Used to indicate that a filter bean declaration should be incorporated into the security + filter chain. + - - - - The filter immediately before which the custom-filter should be placed in the chain - - - - - The explicit position at which the custom-filter should be placed in the chain. Use if you are replacing a standard filter. - - + + + + + + + + + The filter immediately after which the custom-filter should be placed in the chain. This + feature will only be needed by advanced users who wish to mix their own filters into the + security filter chain and have some knowledge of the standard Spring Security filters. The + filter names map to specific Spring Security implementation filters. + + + + + + The filter immediately before which the custom-filter should be placed in the chain + + + + + + The explicit position at which the custom-filter should be placed in the chain. Use if you + are replacing a standard filter. + + + - - - The filter immediately after which the custom-filter should be placed in the chain. This feature will only be needed by advanced users who wish to mix their own filters into the security filter chain and have some knowledge of the standard Spring Security filters. The filter names map to specific Spring Security implementation filters. - - + + + The filter immediately after which the custom-filter should be placed in the chain. This + feature will only be needed by advanced users who wish to mix their own filters into the + security filter chain and have some knowledge of the standard Spring Security filters. The + filter names map to specific Spring Security implementation filters. + + + - - - The filter immediately before which the custom-filter should be placed in the chain - - + + + The filter immediately before which the custom-filter should be placed in the chain + + + - - - The explicit position at which the custom-filter should be placed in the chain. Use if you are replacing a standard filter. - - + + + The explicit position at which the custom-filter should be placed in the chain. Use if you + are replacing a standard filter. + + + - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + - + \ No newline at end of file diff --git a/config/src/main/resources/org/springframework/security/config/spring-security-3.2.rnc b/config/src/main/resources/org/springframework/security/config/spring-security-3.2.rnc index b4b0396890..c030000ef1 100644 --- a/config/src/main/resources/org/springframework/security/config/spring-security-3.2.rnc +++ b/config/src/main/resources/org/springframework/security/config/spring-security-3.2.rnc @@ -524,7 +524,7 @@ session-management.attlist &= ## Allows injection of the SessionAuthenticationStrategy instance used by the SessionManagementFilter attribute session-authentication-strategy-ref {xsd:token}? session-management.attlist &= - ## Defines the URL of the error page which should be shown when the SessionAuthenticationStrategy raises an exception. If not set, an unauthorized (402) error code will be returned to the client. Note that this attribute doesn't apply if the error occurs during a form-based login, where the URL for authentication failure will take precedence. + ## Defines the URL of the error page which should be shown when the SessionAuthenticationStrategy raises an exception. If not set, an unauthorized (401) error code will be returned to the client. Note that this attribute doesn't apply if the error occurs during a form-based login, where the URL for authentication failure will take precedence. attribute session-authentication-error-url {xsd:token}? diff --git a/config/src/main/resources/org/springframework/security/config/spring-security-3.2.xsd b/config/src/main/resources/org/springframework/security/config/spring-security-3.2.xsd index 5f46e007bb..007ec1d26a 100644 --- a/config/src/main/resources/org/springframework/security/config/spring-security-3.2.xsd +++ b/config/src/main/resources/org/springframework/security/config/spring-security-3.2.xsd @@ -1702,7 +1702,7 @@ Defines the URL of the error page which should be shown when the - SessionAuthenticationStrategy raises an exception. If not set, an unauthorized (402) error + SessionAuthenticationStrategy raises an exception. If not set, an unauthorized (401) error code will be returned to the client. Note that this attribute doesn't apply if the error occurs during a form-based login, where the URL for authentication failure will take precedence. diff --git a/docs/manual/src/docbook/appendix-namespace.xml b/docs/manual/src/docbook/appendix-namespace.xml index 463dabc948..88c6fd0ced 100644 --- a/docs/manual/src/docbook/appendix-namespace.xml +++ b/docs/manual/src/docbook/appendix-namespace.xml @@ -1200,7 +1200,7 @@
<literal>session-authentication-error-url</literal> Defines the URL of the error page which should be shown when the SessionAuthenticationStrategy - raises an exception. If not set, an unauthorized (402) error code will be returned to the client. + raises an exception. If not set, an unauthorized (401) error code will be returned to the client. Note that this attribute doesn't apply if the error occurs during a form-based login, where the URL for authentication failure will take precedence.
diff --git a/docs/manual/src/docbook/namespace-config.xml b/docs/manual/src/docbook/namespace-config.xml index 2c606b4db1..b837c562a3 100644 --- a/docs/manual/src/docbook/namespace-config.xml +++ b/docs/manual/src/docbook/namespace-config.xml @@ -509,7 +509,7 @@ authentication-failure-url if form-based login is being used. If the second authentication takes place through another non-interactive mechanism, such as remember-me, an unauthorized - (402) error will be sent to the client. If instead you want to use an error + (401) error will be sent to the client. If instead you want to use an error page, you can add the attribute session-authentication-error-url to the session-management element.