Port the latest unreleased UndeclaredThrowableStrategy implementation
from cglib to fix a memory-leak present in v3.
Issue: SPR-10709
(cherry picked from 587877c)
Just AsyncAnnotationBeanPostProcessor switches "beforeExistingAdvisors" to "true" by default. So effectively, MethodValidation/PersistenceExceptionTranslationPostProcessor apply after existing advisors by default again, fixing the 3.1->3.2 regression.
Issue: SPR-10309
Assuming reference comparisons are much quicker than checking
likely-nested logger levels, perform the former first.
Also, since the reference can match only one of the instances,
use "else if" to short-circuit the search.
Prior to this commit many test utility classes and sample beans were
duplicated across projects. This was previously necessary due to the
fact that dependent test sources were not shared during a gradle
build. Since the introduction of the 'test-source-set-dependencies'
gradle plugin this is no longer the case.
This commit attempts to remove as much duplicate code as possible,
co-locating test utilities and beans in the most suitable project.
For example, test beans are now located in the 'spring-beans'
project.
Some of the duplicated code had started to drift apart when
modifications made in one project where not ported to others. All
changes have now been consolidated and when necessary existing tests
have been refactored to account for the differences.
Conflicts:
spring-beans/src/test/java/org/springframework/beans/factory/ConcurrentBeanFactoryTests.java
spring-beans/src/test/java/org/springframework/beans/factory/support/BeanFactoryGenericsTests.java
spring-beans/src/test/java/org/springframework/beans/support/PagedListHolderTests.java
Move code from spring-build-junit into spring-core/src/test along with
several other test utility classes. This commit removes the temporary
spring-build-junit project introduced in commit
b083bbdec720d3f5b1c7f065dfe8ccb7a7f3b201.
Fix deprecation compiler warnings by refactoring code or applying
@SuppressWarnings("deprecation") annotations. JUnit tests of
internally deprecated classes are now themselves marked as
@Deprecated.
Numerous EasyMock deprecation warnings will remain until the
migration to mockito can be completed.
Fix serialization warnings by applying @SuppressWarnings("serial")
when appropriate.
In certain cases and for unknown reasons, a correctly-placed
@SuppressWarnings("serial") annotation will fix the warning at the
javac level (i.e. the Gradle command-line), but will produce an
"unnecessary @SuppressWarnings" warning within Eclipse. In these
cases, a private static final serialVersionUID field has been added
with the default value of 1L.
In particular, avoiding synchronized Sets and Maps wherever possible (preferring a ConcurrentHashMap even instead of a synchronized Set) and specifying appropriate ConcurrentHashMap initial capacities (even if we end up choosing 16).
- Support external Javadoc links using Gradle's javadoc.options.links
- Fix all other Javadoc warnings, such as typos, references to
non-existent (or no longer existent) types and members, etc,
including changes related to the Quartz 2.0 upgrade (SPR-8275) and
adding the HTTP PATCH method (SPR-7985).
- Suppress all output for project-level `javadoc` tasks in order to
hide false-negative warnings about cross-module @see and @link
references (e.g. spring-core having a @see reference to spring-web).
Use the `--info` (-i) flag to gradle at any time to see project-level
javadoc warnings without running the entire `api` task. e.g.
`gradle :spring-core:javadoc -i`
- Favor root project level `api` task for detection of legitimate
Javadoc warnings. There are now zero Javadoc warnings across the
entirety of spring-framework. Goal: keep it that way.
- Remove all @link and @see references to types and members that exist
only in Servlet <= 2.5 and Hibernate <= 4.0, favoring 3.0+ and 4.0+
respectively. This is necessary because only one version of each of
these dependencies can be present on the global `api` javadoc task's
classpath. To that end, the `api` task classpath has now been
customized to ensure that the Servlet 3 API and Hibernate Core 4 jars
have precedence.
- SPR-8896 replaced our dependency on aspectjrt with a dependency on
aspectjweaver, which is fine from a POM point of view, but causes
a spurious warning to be emitted from the ant iajc task that it
"cannot find aspectjrt on the classpath" - even though aspectjweaver
is perfectly sufficient. In the name of keeping the console quiet, a
new `rt` configuration has been added, and aspectjrt added as a
dependency to it. In turn, configurations.rt.asPath is appended to
the iajc classpath during both compileJava and compileTestJava for
spring-aspects.
Issue: SPR-10078, SPR-8275, SPR-7985, SPR-8896
Class#getDeclaredMembers returns arbitrary results under JDK7. This
results in non-deterministic execution of JUnit test methods, often
revealing unintended dependencies between methods that rely on a
specific order to succeed.
JUnit 4.11 contains support for predictable test ordering [1], but at
the time of this commit, JUnit 4.11 has not yet been released.
Therefore we are testing against a snapshot version [2], which has been
uploaded to repo.springsource.org [3] for easy access. Note that this
artifact may be removed when JUnit 4.11 goes GA.
- Care has been taken to ensure that spring-test's compile-time
dependency on JUnit remains at 4.10. This means that the spring-test
pom.xml will continue to have an optional <dependency> on JUnit
4.10, instead of the 4.11 snapshot.
- For reasons not fully understood, the upgrade to the 4.11 snapshot
of junit-dep caused NoSuchMethodErrors around certain Hamcrest
types, particularly CoreMatchers and Matchers. import statements
have been updated accordingly throughout affected test cases.
- Runtime errors also occurred around uses of JUnit @Rule and
ExpectedException. These have been reverted to use simpler
mechanisms like @Test(expected) in the meantime.
- Some test methods with order-based dependencies on one another have
been renamed in order to fall in line with JUnit 4.11's new method
ordering (as opposed to actually fixing the inter-test
dependencies). In other areas, the fix was as simple as adding a
tearDown method and cleaning up state.
- For no apparent reason, the timeout in AspectJAutoProxyCreatorTests'
testAspectsAndAdvisorNotAppliedToPrototypeIsFastEnough method begins
to be exceeded. Prior to this commit the timeout value was 3000 ms;
on the CI server under Linux/JDK6 and JDK7, the test begins taking
anywhere from 3500-5500 ms with this commit. It is presumed that
this is an incidental artifact of the upgrade to JUnit 4.11. In any
case, there are no changes to src/main in this commit, so this
should not actually represent a performance risk for Spring
Framework users. The timeout has been increased to 6000 ms to
accommodate this situation.
[1]: https://github.com/KentBeck/junit/pull/293
[2]: https://github.com/downloads/KentBeck/junit/junit-dep-4.11-SNAPSHOT-20120805-1225.jar
[3]: https://repo.springsource.org/simple/ext-release-local/junit/junit-dep/4.11.20120805.1225
Issue: SPR-9783
- Allow reset of GlobalAdvisorAdapterRegistry
Provide a reset() method allowing the GlobalAdvisorAdapterRegistry
instance to be replaced with a fresh instance. This method has
primarily been added to allow unit tests to leave the registry
in a known state.
- Protect against the fact that calls to configuration class methods
my occur in a random order.
Issue: SPR-9779
Update the ReflectiveAspectJAdvisorFactory class to sort candidate
AOP methods based on their annotation first and method name second.
Prior to this the order of aspects created from annotated methods
could differ depending on the underling JVM, as first noticed under
JDK7 in SPR-9729.
- ConvertingComparator and InstanceComparator have been introduced in
support of this change, per SPR-9730.
- A shared static INSTANCE field has been added to ComparableComparator
to avoid unnecessary instantiation costs within ConvertingComparator
as well as to prevent generics warnings during certain caller
scenarios.
Issue: SPR-9729, SPR-9730
CGLIB 3 has been released in order to depend on ASM 4, which Spring now
depends on internally (see previous commit).
This commit eliminates spring-beans' optional dependency on cglib-nodep
v2.2 and instead repackages net.sf.cglib => org.springframework.cglib
much in the same way we have historically done with ASM.
This change is beneficial to users in several ways:
- Eliminates the need to manually add CGLIB to the application
classpath; especially important for the growing number of
@Configuration class users. Java-based configuration functionality,
along with proxy-target-class and method injection features now
work 'out of the box' in Spring 3.2.
- Eliminates the possibility of conflicts with other libraries that
may dependend on differing versions of CGLIB, e.g. Hibernate
3.3.1.ga and its dependency on CGLIB 2.1.3 would easily cause a
conflict if the application were depending on CGLIB 3 for
Spring-related purposes.
- Picks up CGLIB 3's changes to support ASM 4, meaning that CGLIB is
that much less likely to work well in a Java 7 environment due to
ASM 4's support for transforming classes with invokedynamic
bytecode instructions.
On CGLIB and ASM:
CGLIB's own dependency on ASM is also transformed along the way to
depend on Spring's repackaged org.springframework.asm, primarily to
eliminate unnecessary duplication of ASM classfiles in spring-core and
in the process save around 100K in the final spring-core JAR file size.
It is coincidental that spring-core and CGLIB currently depend on the
exact same version of ASM (4.0), but it is also unlikely to change any
time soon. If this change does occur and versions of ASM drift, then
the size optimization mentioned above will have to be abandoned. This
would have no compatibility impact, however, so this is a reasonable
solution now and for the forseeable future.
On a mysterious NoClassDefFoundError:
During the upgrade to CGLIB 3.0, Spring test cases began failing due to
NoClassDefFoundErrors being thrown from CGLIB's DebuggingClassWriter
regarding its use of asm-util's TraceClassVisitor type. previous
versions of cglib-nodep, particularly 2.2, did not cause this behavior,
even though cglib-nodep has never actually repackaged and bundled
asm-util classes. The reason for these NoClassDefFoundErrors occurring
now is still not fully understood, but appears to be due to subtle JVM
bytecode preverification rules. The hypothesis is that due to minor
changes in DebuggingClassWriter such as additional casts, access to
instance variables declared in the superclass, and indeed a change in
the superclass hierarchy, preverification may be kicking in on the
toByteArray method body, at which point the reference to the missing
TraceClassVisitor type is noticed and the NCDFE is thrown. For this
reason, a dummy implementation of TraceClassVisitor has been added to
spring-core in the org.springframework.asm.util package. This class
simply ensures that Spring's own tests never result in the NCDFE
described above, and more importantly that Spring's users never
encounter the same.
Other changes include:
- rename package-private Cglib2AopProxy => CglibAopProxy
- eliminate all 'cglibAvailable' checks, warnings and errors
- eliminate all 'CGLIB2' language in favor of 'CGLIB'
- eliminate all mention in reference and java docs of needing to add
cglib(-nodep) to one's application classpath
Issue: SPR-9669
@Async executor qualification has been backported to 3.1.2. This commit
updates all @since tags appropriately, as well as carrying over the
changes backported to the spring-task-3.1 schema.
Issue: SPR-6847, SPR-9443
Commit 096693c46fba6e09b346a498b7002abd4d6540a9 refactored and
deprecated TransactionAspectUtils, moving its #qualifiedBeanOfType
and related methods into BeanFactoryUtils. This created a package cycle
between beans.factory and beans.factory.annotation due to use of the
beans.factory.annotation.Qualifier annotation in these methods.
This commit breaks the package cycle by introducing
beans.factory.annotation.BeanFactoryAnnotationUtils and moving these
@Qualifier-related methods to it. It is intentionally similar in name
and style to the familiar BeanFactoryUtils class for purposes of
discoverability.
There are no backward-compatibilty concerns associated with this change
as the cycle was introduced, caught and now fixed before a release.
Issue: SPR-6847
Prior to this change, Spring's @Async annotation support was tied to a
single AsyncTaskExecutor bean, meaning that all methods marked with
@Async were forced to use the same executor. This is an undesirable
limitation, given that certain methods may have different priorities,
etc. This leads to the need to (optionally) qualify which executor
should handle each method.
This is similar to the way that Spring's @Transactional annotation was
originally tied to a single PlatformTransactionManager, but in Spring
3.0 was enhanced to allow for a qualifier via the #value attribute, e.g.
@Transactional("ptm1")
public void m() { ... }
where "ptm1" is either the name of a PlatformTransactionManager bean or
a qualifier value associated with a PlatformTransactionManager bean,
e.g. via the <qualifier> element in XML or the @Qualifier annotation.
This commit introduces the same approach to @Async and its relationship
to underlying executor beans. As always, the following syntax remains
supported
@Async
public void m() { ... }
indicating that calls to #m will be delegated to the "default" executor,
i.e. the executor provided to
<task:annotation-driven executor="..."/>
or the executor specified when authoring a @Configuration class that
implements AsyncConfigurer and its #getAsyncExecutor method.
However, it now also possible to qualify which executor should be used
on a method-by-method basis, e.g.
@Async("e1")
public void m() { ... }
indicating that calls to #m will be delegated to the executor bean
named or otherwise qualified as "e1". Unlike the default executor
which is specified up front at configuration time as described above,
the "e1" executor bean is looked up within the container on the first
execution of #m and then cached in association with that method for the
lifetime of the container.
Class-level use of Async#value behaves as expected, indicating that all
methods within the annotated class should be executed with the named
executor. In the case of both method- and class-level annotations, any
method-level #value overrides any class level #value.
This commit introduces the following major changes:
- Add @Async#value attribute for executor qualification
- Introduce AsyncExecutionAspectSupport as a common base class for
both MethodInterceptor- and AspectJ-based async aspects. This base
class provides common structure for specifying the default executor
(#setExecutor) as well as logic for determining (and caching) which
executor should execute a given method (#determineAsyncExecutor) and
an abstract method to allow subclasses to provide specific strategies
for executor qualification (#getExecutorQualifier).
- Introduce AnnotationAsyncExecutionInterceptor as a specialization of
the existing AsyncExecutionInterceptor to allow for introspection of
the @Async annotation and its #value attribute for a given method.
Note that this new subclass was necessary for packaging reasons -
the original AsyncExecutionInterceptor lives in
org.springframework.aop and therefore does not have visibility to
the @Async annotation in org.springframework.scheduling.annotation.
This new subclass replaces usage of AsyncExecutionInterceptor
throughout the framework, though the latter remains usable and
undeprecated for compatibility with any existing third-party
extensions.
- Add documentation to spring-task-3.2.xsd and reference manual
explaining @Async executor qualification
- Add tests covering all new functionality
Note that the public API of all affected components remains backward-
compatible.
Issue: SPR-6847
In anticipation of substantive changes required to implement @Async
executor qualification, the following updates have been made to the
components and infrastructure supporting @Async functionality:
- Fix trailing whitespace and indentation errors
- Fix generics warnings
- Add Javadoc where missing, update to use {@code} tags, etc.
- Avoid NPE in AopUtils#canApply
- Organize imports to follow conventions
- Remove System.out.println statements from tests
- Correct various punctuation and grammar problems
Commit 180c5b2ef6c16f66145a4250b597a093e566d922 introduced 3.2 versions
of all spring-* schemas; this commit updates spring.schemas mapping
files to include these new versions.
This patch fixes several compiler warnings that do not point to code
problems. Two kinds of warnings are fixed. First in a lot of cases
@SuppressWarnings("unchecked") is used although there are no unchecked
casts happening. This seems to be a leftover from when the code base
was on Java 1.4, now that the code base was moved to Java 1.5 these are
no longer necessary. Secondly there some places where the raw types of
List and Class are used where there wildcard types (List<?> and
Class<?>) would work just as well without causing any raw type warnings.
These changes are beneficial particularly when working in Eclipse or
other IDEs because it reduces 'noise', helping to isolate actual
potential problems in the code.
The following changes have been made:
- remove @SuppressWarnings where no longer needed
- use wildcard types instead of raw types where possible
Juergen Hoeller
Phillip Webb
David Harkness
Chris Beams
Ezequiel Ballesi
Dave Syer
Philippe Marschall